Fagor CNC 8058elite T - User Manual

Ref. 2107
8058/8060
8065/8070
CNCelite
Remote modules.
RIO5, RIOW and RIOR series.

Fagor CNC 8058elite T Specifications

General

Brand	Fagor
Model	CNC 8058elite T
Category	Control Unit
Language	English

Summary

RIO5 Remote Modules (CANopen Protocol)

Dimensions and Power Supply

Details module dimensions, mounting, and power supply information.

Digital I;O and Electrical Specs

Configuration and electrical characteristics of digital I/O modules.

Input;Output Numbering

Methods for numbering digital and analog I/O within groups.

RIOW Remote Modules (CANopen Protocol)

Dimensions and Characteristics

Physical dimensions and technical/electrical specifications of RIOW modules.

Installation and Module Operations

Guidelines for installation, group sizing, and operations of specific modules.

I;O Numbering

How digital and analog I/O are numbered within groups.

RIOR Remote Modules (CANopen & EtherCAT)

RIOR Module Overview

Introduction to RIOR modules for CANopen and EtherCAT buses.

Dimensions, Power, and Specs

Physical dimensions, power supply requirements, and electrical characteristics.

Connectors and Connections

Description of connectors and wiring for EtherCAT and CANopen.

CAN Bus and Module Configuration

CAN Bus Characteristics

Information on CANopen protocol and bus characteristics.

Module Identification and Baudrate

How modules are identified by address and baudrate is selected.

Safety and Maintenance

Safety Conditions

Essential safety measures to prevent injury and product damage.

Precautions Against Damage

Guidelines to prevent product damage and explanation of safety symbols.

CNC Maintenance

Guidance on cleaning and maintaining the CNC unit.