38
Troubleshooting
Possible cause and solution
1. Turn the volume knob to make sure it is not turned off.
2. Make sure the Local Mode is set to ON.
No sound
Errors
No sound from the pads
No click Sound
Sound is distorted
Wrong tone
1. Make sure the pad is properly connected.
2. Make sure the volume is not set to 0.
1. Make sure that the volume is not set to 0.
1. Turn the volume down.
1. If you get the wrong sound, e.g. you hit the snare and get a rim sound, make sure
that the sensitivity of the adjuster on the snare has been turned to an optimal position
and that the device does not touch the snare head too tightly or too loosely.
To Next Page
Loading...
