Fantic XEF 250 - Page 17

1. General information
USE AND MAINTENANCE MANUAL CHAPTER 1
GENERAL INFORMATIONXEF 250 - Rev01 / 2020
17
1
Technical data Value(s)
Final drive Chain
Secondary reduction ratio 3.923 (51/13)
Transmission type Constant mesh, 6-speed
Operation Left foot operation
Gear ratio:
1a
2a
3a
4a
5a
6a
2.385 (31/13)
1.813 (29/16)
1.444 (26/18)
1.143 (24/21)
0.957 (22/23)
0.815 (22/27)
Seats 1
Frame Semi double cradle
Caster angle 27.2°
Trail 116 mm (4.6 in)
Wheels (original equipment):
Front
Rear
Front inflation pressure (road use)
Rear inflation pressure (road use)
Front/rear inflation pressure (“Racing” use)
90/90-21
130/90-18
2 bar (200 kPa - 29 PSI)
2,2 bar (220 kPa - 32 PSI)
1 bar (100 kPa - 15 PSI)
Wheels (alternative sizes):
Front
Rear
Front inflation pressure (road use)
Rear inflation pressure (road use)
Front/rear inflation pressure (“Racing” use)
80/100-21
140/80-18, 120/90-18
2 bar (200 kPa - 29 PSI)
2,5 bar (250 kPa - 36 PSI)
1 bar (100 kPa - 15 PSI)
Brake:
Front brake type
Operation
Rear brake type
Operation
Hydraulic single disc brake
Right hand operation
Hydraulic single disc brake
Right foot operation
Suspension:
Front suspension
Rear suspension
Telescopic fork
Swingarm (link suspension)
Shock absorber:
Front shock absorber
Rear shock absorber
Coil spring/hydraulic damper
Coil spring/gas-hydraulic damper
Wheel travel:
Front wheel travel
Rear wheel travel
310 mm (12.2 in)
317 mm (12.5 in)
Ignition system TCI
Turn signals 12 V – 6 W
High/low beam light Led
Position/brake light Led
License plate light Led
Fuses:
Battery fuse
Electrical wiring fuse
15.0 A
5.0 A