Fantic XEF 250 - Clutch Maintenance Procedures

4. Maintenance
USE AND MAINTENANCE MANUAL CHAPTER 4
MAINTENANCEXEF 250 - Rev01 / 2020
75
4
1
2
4.8 SOUNDPROOFING
– Remove the fixing rivets (no. 6) of the bottom cover, then
remove the cover from the silencer;
– Remove the end cap from the silencer and remove the
soundproofing cartridge inside it;
– Insert a new cartridge, then replace the end cap on the
silencer;
– Refit the cover and secure the cover/end cap/silencer
assembly with new breakstem rivets.
A correct and regular maintenance of the
soundproofing element guarantees the best
performance of the vehicle and allows it to be driven
on the road and/or in approved circuits.
4.9 CLUTCH
Clutch removal
– Remove the clutch crankcase bolts “2” following a cross
pattern, then remove the crankcase “1”;