13 Motore1. General information
USE AND MAINTENANCE MANUAL CHAPTER 1
GENERAL INFORMATIONXEF 250 - Rev01 / 2020
16
1.8 TECHNICAL DATA
All the values indicated refer to the approved version.
Technical data Value(s)
Overall length: 2175 mm (85.6 in)
Overall width: 825 mm (32.5 in)
Overall height: 1270 mm (50.0 in)
Seat height: 955 mm (37.6 in)
Wheelbase: 1480 mm (58.3 in)
Minimum ground clearance: 320 mm (12.60 in)
Weight in running order: 116 kg (255.7 lb)
Weight at full load: 176 kg (388.0 lb)
Maximum allowable weight: 250 kg (551.2 lb)
Engine type Liquid cooled, 4-stroke, gasoline
Cylinder arrangement Single cylinder
Displacement 250 cm
3
Bore × stroke 77.0 x 53.6 mm (3.03 x 2.11 in)
Compression ratio: 13.8 : 1
Valve train DOHC
Starting system Electric starter
Lubrication system Wet sump
Transmission oil:
Recommended type
Periodic oil change
With oil filter removal
Total amount
10W-40, 10W-50, 15W-40, 20W-50 API service SG type or higher,
JASO standard Ma
0.73 L (0.64 Imp qt, 0.73 US qt)
0.75 L (0.66 Imp qt, 0.75 US qt)
0.95 L (0.84 Imp qt, 1.00 US qt)
Oil filter:
Oil filter type Cartridge
Cooling system:
Coolant quantity (including all routes)
Radiator cap valve opening pressure
0.93 L (0.82 Imp qt, 0.98 US qt)
107.9–137.3 kPa (1.08–1.37 kgf/cm
2
, 15.6–19.9 psi))
Air filter oil Air Filter Special Oil
Brake oil Synthetic Brake Fluid DOT 4
Air filter Wet element
Fuel:
Type
Tank capacity
Reserve amount
Premium unleaded gasoline only
7.9 L (1.70 Imp gal, 2.10 US gal)
2.0 L (0.44 Imp gal, 0.53 US gal)
Fuel pump:
Pump type
Maximum consumption amperage
Electrical
2.4 A
Fuel injector (resistance) 12.0
Throttle body BAK1 00
Spark plug:
Type/Manufacturer
Gap
NGK/LMAR8E-J
0.6–0.7 mm (0.024–0.028 in)
Clutch type Wet, multiple-disc
Primary reduction system Gear
Primary reduction ratio 3.353 (57/17)
To Next Page
Loading...
