Fayat Group DYNAPAC CA5000 - Dynapac Sub System (DSS)

Machine description
4812158701_G.pdf2019-10-01
Dynapac Sub System (DSS)
DSS
code
Description NoteDSS
code
Description Note
1 Speed sensor, front Optional1 Speed sensor, front Optional
2 Speed sensor, rear2 Speed sensor, rear
3 Inclination sensor Optional3 Inclination sensor Optional
4 DCM Optional4 DCM Optional
5 IO-Card5 IO-Card
6 Cooling fan speed sensor6 Cooling fan speed sensor
7 Vibration frequency meter Supervision only active if Adjustable frequency or
ECO available.
Optional7 Vibration frequency meter Supervision only active if Adjustable frequency or
ECO available.
Optional
8 Power group 1 see Fuse 38 Power group 1 see Fuse 3
9 Power group 2 see Fuse 49 Power group 2 see Fuse 4
10 Power group 3 see Fuse 510 Power group 3 see Fuse 5
11 Power group 4 see Fuse 611 Power group 4 see Fuse 6
12 DCO Com Error Optional12 DCO Com Error Optional
13 Hydraulic temp sensor Sensor data out of range13 Hydraulic temp sensor Sensor data out of range
Alarms received are logged and can be seen by
selecting Display alarms.
Inactive faults disappear from the log when you restart
the ignition.
Selection of Display alarms.
"ENGINE ALARM"
Logged engine alarms.
Stored in the engine ECU.
43