Fayat Group DYNAPAC CA5000 - Machine with Speed Limiter (Speed Potentiometer) - Optional

Operation
4812158701_G.pdf2019-10-01
Fig. The display shows the selection in
the middle (tortoise, drum spin, wheelspin
or hare).
The machine's gear position is shown in the center of
the speedometer; select the gear/speed for the task.
The machine does not need to be stopped to change
gear position.
Max. speedMax. speed
= Hare 11 km/h 7 mph= Hare 11 km/h 7 mph
= Drum spin 5,5 km/h 3.5 mph= Drum spin 5,5 km/h 3.5 mph
= Wheelspin 7 km/h 4.5 mph= Wheelspin 7 km/h 4.5 mph
= Tortoise 4,5 km/h 3 mph= Tortoise 4,5 km/h 3 mph
Carefully move the forward/reverse lever (2) forwards
or backwards, depending on which direction of travel
is required.
The speed increases as the lever is moved away from
the neutral position.
2
1
Fig. Control panel
1. Potentiometer (speed limiter)
2. Forward/Reverse lever
Machine with speed limiter (speed potentiometer) -
Optional.
Set the potentiometer (1) for variable speed setting in
the required mode.
The machine's gear position is shown in the center of
the speedometer. Select the gear/speed for the task.
67