27
Chapter "Usage"
4. Switch off the pushing support by releasing the lower button.
4.7 Charging the battery
You can either leave the battery in the drivepack during
charging or remove it from the drivepack and charge it
separately.
1. Before charging the battery, prepare the charger by connecting the
power cord to the power supply.
More detailed information can be found → in chapter 34.1 "Prepare charger".
2. Remove the drivepack from the eBike.
More detailed information can be found → in chapter 15.2 "Remove drivepack from
e-bike".
3. Insert the charging plug into the charging socket on the battery.
More detailed information can be found → in chapter 34.2 "Connector charger to the
battery".
4. Plug the power plug into a suitable wall outlet to establish the power
connection.
The charging process starts automatically after connection to the
mains.
More detailed information can be found → in chapter 31.6 "Charging process" and in
chapter 31.7 "Battery charge level indicator".
5. Disconnect the charger from the mains by unplugging the mains plug
from the socket when charging is complete or to interrupt charging.
6. Disconnect the charger from the battery by pulling the charger plug out
of the charging socket on the battery.
More detailed information can be found → in chapter 34.3 "Unplug charger from
battery".
To Next Page
Loading...
