Chapter "Using remote model "fX""
62
2 7. 5 Rain mode
The rain mode prevents rain drops from unintentionally adjusting the
support level of your e-bike.
If you have activated the rain mode, use the center button to set the desired
support level:
1. Activate the rain mode by holding down the center button for 2 seconds.
A short blue LED animation appears.
2. In rain mode, press the center button 1x briefly to switch to the next
higher support level.
By briefly pressing the center button again, you can switch to the next
higher support level in the following order:
no support
→
"Breeze
→
"River
→
"Rocket"
→
no support etc.
3. To return from the rain mode to the regular operating mode, press and
hold the center button again for 2 seconds.
To Next Page
Loading...
