41
Chapter "Using drivepack"
2. Swing the upper end of the drivepack into the down tube of the e-bike.
When you have inserted the drivepack correctly and completely
into the down tube, the locking mechanism built into the down tube
automatically engages in the motor mount and locks the drivepack in
the correct position.
The push button or locking lever also moves automatically into the
closed position.
3. Check the drivepack makes a tight fit.
If the drivepack does not lock, pull it out again if necessary and then try
to insert it again. Do not use the drive system if the drivepack cannot
be locked to the e-bike.
To Next Page
Loading...
