Need help?Do you have a question about the Federal Signal Corporation SS2000+ ? Series and is the answer not in the manual?
General| Category | Controller |
|---|---|
| Manufacturer | Federal Signal Corporation |
| Humidity | 0-95% non-condensing |
| Type | Siren and Light Controller |
| Compatibility | Emergency Vehicles |
| Output Channels | Varies by model |
| Input Voltage | 12V DC |
| Output Voltage | 12V DC |
| Number of Outputs | Varies by model |
| Storage Temperature | -40°C to +70°C (-40°F to +158°F) |
| Programmability | Yes |
Details the terms and conditions of the product's warranty coverage.
Provides critical safety instructions and precautions for installation, operation, and maintenance.
Introduces the SS2000+ Series C, its capabilities, and key features.
Explains different operating modes like standalone, computer, and streaming.
Lists the technical details, electrical, and interface specifications for the SS2000+.
Details physical connectors, indicators, controls, and jumper settings.
Guides through SSLoader+ installation and general configuration.
Details how to define activation functions, codes, and modes within SSLoader+.
Describes how to activate the system using front panel hotkeys and manual commands.
Details how to interface with Industrial Control Systems using the Modbus protocol.
Covers logging into the web interface and configuring network parameters.
Explains RTU setup, user configuration, firmware updates, and factory defaults.
Describes how to activate the system using the web interface.
Lists available replacement parts and provides contact information for technical support.
To Next Page
