| 12
ECOTRONIC Plus
© Ferroli 08164 ECOTRONIC Plus.monen.indd
Beginning with system 2, different hydraulic variants are
possible (pump or valve control):
For each variant, the controller allocates the corresponding
relays and sensors.The allocations of the most important
combinations are shown in 3.5.
The system and the variant have to be selected first (Solar/
Options/...)!
system 1
system 2 variant 1 system 2 variant 2
system 6 variant 3
system 6 variant 2
system 4 variant 4
system 3 variant 2
system 3 variant 1
system 7 variant 2
system 6 variant 1
system 7 variant 1
system 5 variant 1
system 5 variant 2
system 3 variant 3 system 4 variant 1
system 4 variant 2 system 4 variant 3
Important note:
If you select a new system, any previous ad-
justments which have been done will be set
back to the factory settings (reset)!
To Next Page
Loading...
