2. Safety instructions for electric drives and controllers
10 Festo P.BE-CMMP-FHPP-DN-SW-EN en 0708NH
2.2 General instructions
Festo AG & Co. KG is not liable for damage caused by failure to observe the warning
instructions in these operating instructions.
Note
Before commissioning you must read the Safety instructions for
electric drives and controllers as from page 9 and the chapter 2,
“Safety instructions for electric drives and controllers”.
If the documentation is not clearly understood in this language version, please inform the
supplier.
The faultless and reliable operation of the motor controller depends on its correct
transport, storage, mounting and installation as well as on careful operation and
maintenance.
Trained and qualified personnel
For the purpose of this manual and the warning instructions on the product itself,
technicians working with this product must be adequately familiar with the setting up,
mounting, commissioning and operation of the product as well as with all warnings and
precautionary measures in accordance with the operating instructions in this product
manual, and must be sufficiently qualified for this task:
- Training and instructions on or authorization to switch on and switch off devices/
systems in accordance with technical safety standards, and to earth and mark them
appropriately in accordance with the application requirements.
- Training or instructions in using and maintaining suitable safety equipment in
accordance with technical safety standards.
- Training in first aid.
The following instructions must be read before the first commissioning of the sytem in
order that bodily injuries and/or damage to property can be avoided.
To Next Page
Loading...
Need help?
General
