Festo CMMP Series Description

2. Safety instructions for electric drives and controllers
Festo P.BE-CMMP-FHPP-DN-SW-EN en 0708NH 9
2. Safety instructions for electric drives and
controllers
2.1 Icons used
Information
Important information
Note
Important instructions
Caution
Considerable damage to property may occur if these instructions
are not observed.
Warning
Considerable damage to property and injury to human beings may
occur if these instructions are not observed.
Warning
DANGER!
Considerable damage to property and injury to human beings may
occur if these instructions are not observed.
Warning
Dangerous voltage
The safety instructions contain reference to dangerous voltages
which may occur.
Accessories
Environment

Festo CMMP Series Specifications

General

Control Mode	Position, Torque
Communication Interfaces	CANopen, EtherCAT, PROFINET, Ethernet/IP
Power Supply	24 V DC
Feedback System	Incremental encoder, Absolute encoder
Number of axes	1
Relative humidity	5% to 95% (non-condensing)
Operating temperature	0 °C ... +50 °C