Festo CMMP Series Description

2. Safety instructions for electric drives and controllers
12 Festo P.BE-CMMP-FHPP-DN-SW-EN en 0708NH
Warning
DANGER!
High electric voltage due to incorrect connection.
Danger of death or bodily injury due to electric shock!
Warning
DANGER!
Surfaces of the device housing may be hot.
Danger of injury. Danger of burning.
Warning
DANGER!
Dangerous movements.
Danger of death, serious bodily injury or damage to property due to
unintentional movement of the motors.
2.4 Safety instructions
2.4.1 General safety information
Warning
The motor controller complies with protection class IP20, as well as
with contamination class 1.
Ensure that the working environment also complies with this
protection/contamination class.
Warning
Use only accessories and spare parts which are approved of by
the manufacturer.
Warning
The motor controllers must be connected to the mains network
in accordance with EN standards and appropriate national
regulations, so that they can be disconnected with suitable
uncoupling devices (e.g. main switch, fuse, circuit breaker).
The motor controller can be fused with a 300 mA all-current
sensitive FI protective switch (RCD = Residual Current Protective
Device).

Festo CMMP Series Specifications

General

Control Mode	Position, Torque
Communication Interfaces	CANopen, EtherCAT, PROFINET, Ethernet/IP
Power Supply	24 V DC
Feedback System	Incremental encoder, Absolute encoder
Number of axes	1
Relative humidity	5% to 95% (non-condensing)
Operating temperature	0 °C ... +50 °C