Festo CPX-FB23 - Table of Contents

Bus node
CPX-FB23, CPX-FB23-24
Festo – P.BE-CPX-FB23-24-EN – 1305a – English 3
Tableofcontents–Busnode
CPX-FB23, CPX-FB23-24
1 Safety and r equirements for product use 7......................................
1.1 Safety 7..................................................................
1.1.1 General safety instructions 7.........................................
1.1.2 Intended use 7.....................................................
1.2 Requirements for product use 8...............................................
1.2.1 Technical requirements 8............................................
1.2.2 Qualification of the specialists (requirements for the personnel) 9............
1.2.3 Range of application and certifications 9................................
2 Installation as function module F24 10..........................................
2.1 General instructions on installation 10...........................................
2.2 Electrical connection and display components 11..................................
2.3 Dismantling and mounting 12..................................................
2.3.1 Dismounting 12.....................................................
2.3.2 Mounting 13.......................................................
2.4 Settings of the DIL switches on the bus node 13...................................
2.4.1 Removing and attaching the DIL switch cover 13...........................
2.4.2 Arrangement of the DIL-switch es 14.....................................
2.4.3 How to set the DI L switch 14...........................................
2.4.4 Setting the operating mode 15.........................................
2.4.5 Setting the baud rate 16..............................................
2.4.6 Configuration as function module F24 or F23 17...........................
2.4.7 Setting the CC-Link slave address 18....................................
2.4.8 Setting of mapping optimisation 21.....................................
2.4.9 Setting the HOLD/CLEAR function 23....................................
2.4.10 Setting the system diagnostics 24......................................
2.5 Connecting the fieldbus 25....................................................
2.5.1 Fieldbus cable 25...................................................
2.5. 2 Fieldbus baud rate and fieldbus length 26................................
2.5.3 Pin allocation of the fieldbus interface 28................................
2.5.4 Connecting the fieldbus 28............................................
2.5.5 Field bus connection with terminating resistors 31.........................
2.6 Pin assignment of power supply 32..............................................
3 Commissioning as function module F24 33.......................................
3.1 General information on commissioning 33........................................