5. Maintenance and conversion
5−14
Festo P.BE−MPA−EN en 0910d
Note
The electrical function of an MPA pneumatic module is
determined by the electronics module used, e.g.:
electromagnetic compatibility (EMC)
switching off the valve supply voltage at all poles
You must observe the instructions in the MPA−...
electronics description if you wish to install an electronics
module of a different type.
Recommendation:
Replace only with electronics modules of the same type.
The electronics modules type VMPA...−FB−... support the
control of two valve solenoid coils per valve position.
To Next Page
Loading...
