Festo MPS System 203 Basic - Function; Sequence description; Start-up prerequisites; Initial position

MPS
®
System 203 Basic
© Festo Didactic 8064034
53
9 Function
The MPS
®
System 203 Basic represents a small production line consisting of a slightly modified
Distributing/Conveyor station, a Joining station and a Sorting station.
The MPS
®
System 203 Basic differentiates between workpieces based on their orientation (workpieces with
the opening facing upwards or downwards) and sorts the workpieces ba color and material
10 Sequence description
10.1 Start-up prerequisites
 Workpieces available in the Stacking Magazine module
(opening facing upwards or downwards is possible).
 No workpieces in the system's material flow process.
 All stations in initial position and started up.
10.2 Initial position
 Conveyor belt motors off at the stations
 Stopper advanced
 Chutes not full