MPS
®
System 203 Basic
56 © Festo Didactic 8064034
22. Color detection at the Sorting station
23. Conveyor motor of the Sorting station is switched off
Black workpiece detected, stored to the chute at the end of the conveyor belt
24. Deflectors 1 and 2 are not advanced
25. The stopper is retracted
26. Conveyor motor of the Sorting station is switched on
27. The workpiece is sorted out onto the chute at the end of the conveyor
28. Conveyor motor of the Sorting station is switched off
29. Deflectors 1 and 2 remain retracted
30. The stopper is advanced
Metallic workpiece detected, stored to the chute at the middle of the conveyor belt
24. The second deflector is advanced
25. The stopper is retracted
26. Conveyor motor of the Sorting station is switched on
27. The workpiece is sorted out onto the chute at the middle of the conveyor
28. Conveyor motor of the Sorting station is switched off
29. The second deflector is retracted
30. The stopper is advanced
Red workpiece detected, stored to the chute at the beginning of the conveyor belt
24. The first deflector is advanced
25. The stopper is retracted
26. Conveyor motor of the Sorting station is switched on
27. The workpiece is sorted out onto the chute at the beginning of the conveyor
28. Conveyor motor of the Sorting station is switched off
29. The first deflector is retracted
30. The stopper is advanced
31. System ready for next run
To Next Page
Loading...
