Festo MS6 SV E 10V24 Series Operating Instructions

Festo — MS6(N)-SV-...-E-10V24 — 2021-11e
Additional information
5
2.2 Intended Use
The product is intended solely for fast and safe venting and for building up pressure gently in
pneumatic piping systems and terminals in industry. The product is a safe, redundant mechatronic
system designed for implementation of the safety functions:
– Safe venting
– Protection against unexpected pressure build-up (pressurisation).
The product is intended for installation in a machine or automated system and must be used exclu-
sively as follows:
– In an industrial environment
–
Within the limits of the product defined by the technical data
è
12 Technical data.
– In its original condition, without unauthorised modifications
– In perfect technical condition
–
In standard operation, which includes standstill, set-up and service operation, as well as emergency
operation
2.3 Foreseeable Misuse
The following examples of foreseeable misuse are among those not approved as intended use:
– Outdoor use
– Operation without adequate venting options
è
5 Assembly
–
Use as press safety valve
– Bypass of the safety function
– Use in reversible operation (using supply air instead of exhaust air, and vice versa)
–
Vacuum operation
– Use of incorrect or clogged silencers
2.4
Training of qualified personnel
Installation, commissioning, service and disassembly should only be conducted by skilled personnel.
The skilled personnel must be familiar with the installation of electrical and pneumatic control sys-
tems.
3 Additional information
– Contact the regional Festo contact if you have technical problems
è
www.festo.com.
–
Accessories and spare parts
è
www.festo.com/catalogue.

Festo MS6 SV E 10V24 Series Specifications

General

Brand	Festo
Model	MS6 SV E 10V24 Series
Category	Control Unit
Language	English