Festo SPC11 - Notes on the Use of this Manual

Contents and general instructions
X
Festo P.BE-SPC11 -DGP-EN en 0012NH
Notes on the use of this manual
This manual contains special information on installing and
commissioning the SPC11 in conjunction with drive type
DGP(I)(L)-....
General, basic information on the method of operation, on
fitting, installing and commissioning pneumatic drives with
theSPC11canbefoundintheSystemmanualP.BE-
SPC11-SYS-....
Manuals for the SPC11
User manual Title Contents
System manual
SPC11 Soft Stop S PC11 electronics/
pneumatics
P.BE-SPC11-SYS... General instructions on installation
and commissioning
Drive-specific supplement for oper-
ating the SPC11 with a certain drive,
e.g. the DGP(I)(L)- ... (e.g. this man-
ual)
P.BE-SPC11-..-... Special instructions on installation
and commissioning as well as para-
meter settings for the relevant
drive
1)
1) These manuals contain the permitted drive-valve c ombinations, drive diameters and mass loads as
well as the parameter settings of the SPC11 which are valid in these cases.
Please note
For installation and commissioning you will require the
S ystem manual as well as the manual “Drive-specific sup-
plement” for the drive used.