Filtec FT-75 - Chapter 2: Operating Your FT-70;75

Chapter 2: Operating Your FT-70/75
Chapter 2:
Operating Your FT-70/75
Starting-Up Your FT-70/75 2-3
The Safety Interlock Switch 2-4
Container Changeover 2-5
Selecting the Container Type to be Inspected 2-5
Adjusting the Inspection Head Height 2-5
Adjusting the Conveyor Guide Rails 2-7
Adjusting the Centerline Trigger Bracket Height 2-7
Adjusting Optional Sensors and Sensor Brackets 2-8
Aligning the Missing Cap Sensor 2-9
Aligning the High Cap Sensor 2-11
Aligning the Smashed Bottle Sensor 2-13
Aligning the Inspection Trigger (Bottles) 2-15
Aligning the Missing Lid Sensor 2-17
Aligning the Bulged Lid Sensor 2-19
Aligning the Down Container Sensor 2-21
Aligning the Inspection Trigger (Cans) 2-22
Industrial Dynamics Company, Ltd. Document 40274-0600 2-1