Chapter Three: Using the System Software
3-5
Software Functions List
There are two types of software functions: Status and Operating.
Status Functions display information about the status of a software
function or system component. Pressing the Arrow Keys has no
effect on a Status Function because it is not a changeable
parameter, it only provides current operating information for a
particular software function.
Operating Functions allow you to change software function values
(parameters). Using the Arrow Keys allows you to change a value,
clear an error, or turn a function on or off.
The following list contains the software functions that are available
to the Operator’s access level. For more information see “Software
Function Descriptions” on page 3-8..
In the following Software Functions List, functions denoted with:
•
1
indicate the function applies to the FT-70 only
•
2
indicate the function applies to the FT-75 only.
Industrial Dynamics Company, Ltd. Document 40274-0600
To Next Page
Loading...