FT-70/75 Fill Level Inspectors Operator’s Guide
4-12
Error Number 124
X-ray Source Disabled through external input connected to pin
TB4-5. Report this error to your Service Department.
Error Number 125
X-ray Generator failure detected during warm-up cycle and the
generator will not activate. Report this error to your Service
Department.
Error Number 126
X-ray generator is warming up for 3 minutes. This warm up
routine occurs if the generator is turned off for more than one
week. When the warm up s complete this error will automatically
clear.
Industrial Dynamics Company, Ltd. Document 40274-0600
To Next Page
Loading...