Fimer PVS-100-TL - Page 4

EN
4
3.5 Technical data 23
3.5.1 Technical data table PVS-100-TL (standard and S2 models) 23
3.5.2 Technical data table PVS-100-TL (SX, SX2, SY, SY2 Models) 25
3.5.3 Technical data table PVS-120-TL (standard and S2 models) 27
3.5.4 Technical data table PVS-120-TL (SX, SX2, SY, SY2 Models) 29
3.5.5 Tightening torques 31
3.5.6 Cable gland clamping range 31
3.5.7 Overall dimensions of the inverter 32
3.5.8 Overall dimensions of the mounting bracket 32
3.6 Efficiency curves 33
3.7 Power derating 34
3.7.1 Power derating due to environmental conditions 34
3.7.2 Power derating due to the input voltage 34
3.7.3 P-Q Capability 35
3.8 Characteristics of a photovoltaic generator 36
3.9 Description of the equipment 37
3.9.1 Operating diagram (example) 37
3.9.2 Mutual connection of multiple inverters 37
3.9.3 Notes on the system sizing 37
3.10 Functionality and components description 38
3.10.1 Highlights 38
3.10.2 Improved commissioning and maintenance 38
3.10.3 Aurora Vision Plant Management Platform 38
3.10.4 Configurable relays 39
3.10.5 Remote switch-on/switch-off 39
3.10.6 Reactive power feed into the grid 39
3.10.7 Limiting the active power fed into the grid 39
3.10.8 Overvoltage surge arrester monitoring 39
3.10.9 Data transmission and control 39
3.10.10 PVS-100/120 GROUNDING KIT 39
3.10.11 PVS-100/120 PRE-CHARGE BOARD KIT 39
3.11 Communication interfaces 40
3.11.1 Ethernet bus connection 40
3.12 Topographic diagram of the equipment 41
3.12.1 PVS-100/120-TL B2 version Standard and S2 models 41
3.12.2 PVS-100/120-TL B2 version SX, SX2, SY, SY2 models 42
3.13 Safety devices 43
3.13.1 Anti-Islanding 43
3.13.2 Ground fault of the photovoltaic panels 43
3.13.3 Overvoltage surge arresters 43
3.13.4 String Fuses 43
3.13.5 Other safeguards 43
4. Lifting and transport 44
4.1 Transport and handling 44
4.2 Equipment weight 44
4.3 Storage 44
4.3.1 Unpacking and checking 44
4.3.2 Lifting 45
4.4 List of supplied components 48