Need help?Do you have a question about the Fimer PVS980-58 and is the answer not in the manual?
Precautions for installation and maintenance work on the inverter and modules.
Instructions for personnel responsible for grounding the inverter and equipment.
General safety instructions for personnel installing or maintaining the inverter.
Safety warnings for commissioning, planning, and operating the inverter.
Lists applicable inverter models and identifies the target audience and required knowledge.
Explains how to identify units and optional components using type designation.
Manufacturer's disclaimer regarding product repair, misuse, or wear and tear.
Instructions for safely moving and lifting the inverter using cranes or forklifts.
Guidelines for proper storage to prevent inverter damage and condensation.
Precautions for transporting the inverter, including height and securing cargo.
Describes the inverter and details its heat exchangers and air circulation for cooling.
Shows standard and optional main circuit diagrams of the inverter's power flow.
Explains requirements and connections for external and internal auxiliary power supplies.
Diagram showing power and control connections for the inverter's BCU and AC500 PLC.
Information on inverter and power module type designation labels and their meaning.
Safety instructions and lists tools needed for moving, fastening, and tightening connections.
Guidelines for designing, constructing, and preparing the inverter foundation.
Steps for safely placing and fastening the inverter onto the prepared foundation.
Procedures for constructing earthing, adding cables, and filling the installation pit.
Guidance on selecting transformers and grid/DC input disconnecting devices.
Guidance on selecting correct DC and AC power cables based on regulations and conditions.
Guidelines for selecting control cables and understanding I/O connections.
Measures for protecting the inverter and cables from short circuits, overload, and ground faults.
Instructions for insulation tests and specifies tightening torques for connections.
Guidelines for routing cables and connecting DC input and AC output cables.
Instructions for connecting a PC and an Ethernet switch for configuration and monitoring.
General warning to obey safety instructions to prevent injury or damage.
A checklist to verify mechanical and electrical installation steps before energizing.
Presents technical specifications, ratings, and derating factors for temperature, altitude, and voltage.
Lists DC and AC fuse types, nominal currents, quantities, and recommendations.
Specifies environmental limits, materials used, and disposal guidelines for the inverter.
Lists applicable standards (IEC, UL, EMC) and certifications (CE, UL, RCM) for the inverter.
Provides overall dimensions and attachment points for the inverter cabinet.
Shows dimension drawings for blind cable lead-through plates and DC cabling lead-throughs.
Provides example dimensions for constructing and reinforcing the inverter foundation.
Shows the layout of the BCU control unit and AC500 PLC, including slot and I/O connections.
Lists and describes the function of each I/O terminal for various ABB AC500 modules.
Tables showing default I/O connections for BCU-12 and specific AC500 modules.
General| Output Voltage | 400 V |
|---|---|
| Maximum Efficiency | 98.8 % |
| Operating Temperature Range | -25°C to +60°C |
| Ingress Protection | IP65 |
| Power Rating | 980 kW |
| Rated AC Power | 980 kW |
| AC Power Output | 9800 W |
To Next Page
