FingerTec TA100C User Guide

5
A Packet of Bolts Screwdriver Siren Cable RFID Cards (5 pieces)
* Exclusively for TA103C-R model only
DC 5V Power Adaptor
A Packet of Bolts
ScrewdriverDC 5V Power Adaptor
Chapter 1
Getting Started
Viewing the User Guide in the Internet
The User Guide is available in the package when you purchased the terminal. The User
Guide is also available online at http://www.fingertec.com and http://user.fingertec.com.
Choose the language that you prefer for your User Guide.
Terminal Included Accessories
Do not abuse the fingerprint sensor by scratching the surface, contacting the sensor’s
surface with heat, pressing hard during placement of fingerprint for verification. Clean
the sensor occasionally with microfiber cloth to maintain the performance of the
sensor.
AC100C MODEL TA100C MODEL
ITEM
DC 5V Power Adaptor
A Packet of Bolts
Screwdriver
Siren Cable
RFID Cards (5 pieces)
FUNCTION
For supplying power to the terminal.
Use the screws to hold the back plate of the terminal against a wall.
Use the screwdriver to open the back plate of ngerprint terminal and to
install the back plate against a wall.
For connecting the terminal to external siren.
For card enrollment and verication.

FingerTec TA100C Specifications

General

Brand	FingerTec
Model	TA100C
Category	IP Access Controllers
Language	English