FingerTec TA100C User Guide

8
ITEM
LCD Screen
LED Display
Keypad
Fingerprint Sensor
RFID Card Induction Area
Speaker
USB Port
Reset Button
FUNCTION
Displaying status of terminal, day, date and time.
Green LED: The terminal is working ne and it is in standby mode.
Red LED :There is an error at the terminal that requires checking.
For rst time use, the terminals need to be charged fully to avoid having the red
light blinking.
To input instructions into the terminal and to allow conguration.
To scan nger for conrmation of identity.
Area that reads RFID cards.
For terminal voice emission.
To upload/download users information, password and transaction logs via
USB disk.
To restart the terminal as and when required.
User Mgt
Enroll users/ manage user data.
User Role
Assign privilege to users for data secu-
rity.
Comm
Setup FingerTec terminal communica-
tion with computer through LAN, RS232
and RS485. Set security password of the
device for a secure data transfer.
System
Congure the settings of the FingerTec
terminals from general to display set-
ting to ngerprint, and reset the termi-
nal to default settings.
Personalize
Adjust the date/time, Voice, bell sched-
ules settings of the terminal.
Data Management
To delete/backup or restore data.
Main Menu
USB Manager
Upload and download data and infor-
mation to and from FingerTec terminal
using a USB ash disk.
Attendance Search
Check attendance and transaction logs
that are available in FingerTec termi-
nals and perform housekeeping in the
machine.
Short Message
Create & manage Short Message dis-
play.
Work Code
Create & manage workcode function-
ality.
Autotest
Tests that can be done on the FingerTec
terminal on various aspects.
System Info
View both available and used memory
in the terminal as well as system infor-
mation.

FingerTec TA100C Specifications

General

Brand	FingerTec
Model	TA100C
Category	IP Access Controllers
Language	English