Fire-Lite ACC-25 - D.4.3: ACC-ZPMK DIP Switch 1 Settings on ACC-25;50 ZS and ACC-25;50 ZST

128 Audio Command Center Series Manual — P/N 51889:E1 6/8/2010
Programmed Activation by FACP MS-5UD-3/7 and MS-10UD-3/7
D.4.3 ACC-ZPMK DIP Switch 1 Settings on ACC-25/50ZS and
ACC-25/50ZST
Switches 1, 2, and 3 are used to configure the ACC-25/50ZS and ACC-25/50ZST for operation
with a specific FACP. The switch settings for use with the MS-5UD-3/7 and MS-10UD-3/7 (soft-
ware version 2.0 or higher) are as follows:
Switch 1 Switch 2 Switch 3 Configuration
ON ON OFF MS-5UD-3/7 and MS-10UD-3/7 Version 2.0 or higher
Table D.8 MS-5UD-3/7 and MS-10UD-3/7 FACP Configuration