Audio Command Center Series Manual — P/N 51889:E1 6/8/2010 117
MS-9600, MS-9200UDLS and MS-9200UD Programmed Activation by FACP
Entering the Master level password (default 00000) will cause the following screen to appear:
Access Point Programming by pressing the 2 key. The following screen will be displayed:
Press the 2 key to alter the programming of an addressable module:
Press the 3 key to edit the programming:
PROGRAMMING
1=AUTOPROGRAM
2=POINT PROGRAM
3=ZONE SETUP
POINT PROGRAM
SELECT TYPE
1=DETECTOR
2=MODULE
MODULES
1=ADD
2=DELETE
3=EDIT
NORMAL MONITOR
Z000
W 1M075
To Next Page
Loading...
