Audio Command Center Series Manual — P/N 51889:E1 6/8/2010 15
Product Features Product Description
• Two Form-C trouble relays:
System Trouble Relay - TB1
AC Power Loss Relay - TB7
• 35 mA Special Application (auxiliary power) output for addressable modules when interfaced
with the Fire•Lite MS-9200(E) or MS-9600 FACP or equivalent and End-of-Line power
supervision relays
• Integral Dress Panel
• Optional ACC-TR semi-flush trim ring
• ACC-FFT Fire Fighter Telephone module for control and annunciation of up to 24 remote
telephone jacks (installation in ACC-25/50ZST only)
• Fire Fighter Handset (FHS-F) used to communicate over the telephone circuit connected to the
ACC-FFT (ACC-25/50ZST only)
• Fire Fighter Phone Jack FPJ-F provides plug-in location for the FHS-F (ACC-25/50ZST only)
• Remote Page Jack RPJ-F provides plug-in location for the FHS-F and All-Call paging
capability (ACC-25/50ZST only)
• Fire Fighter Handset Cabinet FHSC-RF (recess mount) or FHSC-SF (surface mount) is used to
store five Fire Fighter Handsets (FHS-F) (ACC-25/50ZST only)
• Optional FC-RM Remote Microphone (includes cabinet and FC-MIM Microphone Interface
Module). Refer to the FC-RM Product Installation Document #51247 for additional
information
• Optional ACC-EPM External Page Module for interfacing to non-fire paging systems
• Optional local playback speaker (FC-LPS)
• System Status LEDs (refer to “Controls and Indicators” on page 23)
• Master Command Bus output for All-Call paging control of Distributed Audio panels in non-
zone split systems
To Next Page
Loading...
