General options Default values
IP Communicator
enablement
Not present
NETWORK enablement Disabled
Delay from alarm #1 0s
Delay from alarm #2 0s
Delay from alarm #3 0s
Delay from alarm #4 0s
Delay from alarm #5 0s
PSTN communicator Default values
Tone check On
Start playing after Selection
Call attempts 3
Iteration 3
Call all tele-monitoring
numbers
No
Call all voice message
numbers
No
Telephone number
label
TEL.NUMBER xx (see note
3 (*****))
All Telephone numbers
behavior
None
Trigger events Panel alarm, Panel Fault
Message #1 to #7 Prerecorded
Note:
1. (**) Automatically assigned Module label.
Automatically assigned Module channel
label The label is composed by a first part
containing the module acronym and address
followed by the brief description of the
channel using the acronym printed on the
module PCB.
The label is composed by a brief description of
the device followed by its address.
xxx = module acronym
yyy = module address
2. For example DDM098: Ingresso A is the default
label for input 1 of the FC410DDM module at
address 98.
(****) tttt represent the on board output type
(4 chars), SC outputs -> tttt=SC
3. Programmable outputs -> tttt=OC y = output
number (*****) xx represent the telephone
number ID (2 digits).
FC503 and FC506 Addressable Fire Control Panels72
Johnson Controls - CONFIDENTIAL
To Next Page
Loading...
