Flashforge DREAMER - Installing Filament; 4.2 Installing Filament

Flashforge Corporation
Dreamer User Guide | www.flashforge.com
21
4.2 Installing Filament
(4-4) Lock the filament in place with the filament spool holder and turn the scroll
roller counter-clockwise.
4-5
(4-5) Insert the filament through the filament guide tube. Attach the guide tube into
the two filament guide tube buckles.
(4-6) Stick the build tape to the build plate after installing filament, as picture shows.
4-4
4-6