Flashforge DREAMER - Connecting Cables and Filament Operation; 4.3 Plugging in Power Cable&USB Cable; 4.4 Loading and Unloading Filament

Flashforge Corporation
Dreamer User Guide | www.flashforge.com
22
4.3 Plugging in Power Cable&USB Cable
(4-7) Locate the power cable, and plug it into the Dreamer.
Optional: Locate the USB cable and plug one end into the Dreamer and the other into
your computer. The Dreamer supports USB connectivity.
4.4 Loading and Unloading Filament
Filament must be passed through the extruder and into the heating tube in order to be
melted. In this user guide, we will demonstrate loading and unloading filament with
the left extruder.
Loading filament:
(4-8) Remove the lid of the Dreamer
4-7
4-8