Flashforge DREAMER - Chapter 3: Unpacking

Flashforge Corporation
Dreamer User Guide | www.flashforge.com
16
Chapter 3. Unpacking
(Reference video:Unpacking)
This chapter will present you the whole unpacking procedure of Dreamer 3D
printer.(Note: Make sure you read the whole unpacking guide)
1.
（3-1）Put Dreamer package on the clean, tidy workbench, using a knife to cut the
tape, then you can see a quick start guide, a leveling card and two build tapes. Please
read the quick start guide first and start you 3D printing journey with your Dreamer
3D printer.
3-1
2. （3-2）Remove the top protective foam pieces, which also houses the Dreamer’s
lid and put them aside. The Dreamer unit and a power cable will be exposed.
3-2