Flexim FLUXUS G800 - Page 138

FLUXUS G80x A Menu Structure
138 UMFLUXUS_G8V4-6-1EN, 2018-10-10
selection of the sound speed range
auto: The area around the average sound speed is defined by the transmit-
ter.
user: The area around the average sound speed has to be entered.
input of the area around the average sound speed of the fluid
This display will only be indicated if user is selected.
input of the kinematic viscosity of the fluid
range: 0.01...30 000 mm²/s
This display will only be indicated if Other Medium is selected or no data set
for the selected fluid is stored in the transmitter.
input of the operation density of the fluid
range: 0.1...20 000 kg/m³, if Special Funct.\SYSTEM settings\Mea-
suring\Gas-Measuring is activated or 0.01...20 g/cm³ if Special
Funct.\SYSTEM settings\Measuring\Gas-Measuring is deactivated
This display will only be indicated if Other Medium is selected or no data set
for the selected fluid is stored in the transmitter.
input of the compressibility coefficient of the gas
range: 0.001...2
This display will only be indicated if Other Medium is selected or no data set
for the selected fluid is stored in the transmitter.
input of the fluid temperature
default: 20 °C
input of the fluid pressure
range: 1...600 bar
This display will only be indicated if Special Funct.\SYSTEM set-
tings\Measuring\Gas-Measuring is activated or if Gas-Measuring is
deactivated and \Special Funct.\SYSTEM settings\Dialogs/Menus
is activated.
selection of the transducer type
This display will only be indicated if no or special transducers are connected.
input of the length of an extension cable
When a calculation channel is selected (Y, Z)
Calculation channels are only available if the transmitter has more than one measuring channel.
display of the current calculation function
selection of the calculation function
Program branch Measuring
main menu: selection of the program branch Measuring
INIT-resis-
tant
c-Medium range
auto >USER<
c-Medium=400m/s
range +-150m/s
Kinem.Viscosity
1.00 mm2/s
Density
60.00 kg/m3
Gas compr.factor
1.000 factor
Medium Temperat.
20.0 C
Fluid pressure
60.00 bar
Transducer Type↕
Standard
Additional cable
65.0 m
Calculation:
Y= A - B
>CH1< funct ch2↕
A - B
par >MEA< opt sf
Measuring