Flexim FLUXUS G800 - Page 141

A Menu Structure FLUXUS G80x
UMFLUXUS_G8V4-6-1EN, 2018-10-10 141
input of the limit for the flow totalizer of the physical quantity to be monitored
This display will only be indicated if Alarm Output is activated and QUANT.
is selected as the switching condition.
input of the hysteresis for the lower or upper limit
This display will only be indicated if Alarm Output is activated and MIN or
MAX is selected as the switching condition.
Program branch Special Funct.
main menu: selection of the program branch Special Funct.
SYSTEM settings
selection of Special Funct.\SYSTEM settings
SYSTEM settings\Set Clock
selection of the displays for the input of the date and the time
SYSTEM settings\Libraries
selection of the displays for the management of the material and fluid scroll
lists
SYSTEM settings\Libraries\Material list
selection of the displays for the arrangement of the material scroll list (pipe
and lining materials)
SYSTEM settings\Libraries\Medium list
selection of the displays for the arrangement of the fluid scroll list
SYSTEM settings\Libraries\Format USER-AREA
selection of the displays for the partitioning of the coefficient memory for the
storing of user defined material and fluid parameters
input of the number of user defined materials
input of the number of user defined fluids
display of the occupancy of the coefficient memory
confirmation of the selected partition
INIT-resis-
tant
Quantity Limit:
1.00 m3
R1 Hysterese:
1.00 m3/h
par mea opt >SF<
Special Funct.
Special Funct. ↕
SYSTEM settings
SYSTEM settings↕
Set Clock
SYSTEM settings↕
Libraries
Libraries ↕
Material list
Libraries ↕
Medium list
Libraries ↕
Format USER-AREA
Format USER-AREA
Materials: 03
Format USER-AREA
Media: 03
USER AREA:
52% used
Format NOW?
no >YES<