FLIR E series User Manual

15.2 Saving an image
General
You can save an image directly, without previewing the image first.
Image capacity
This table gives information on the approximate number of infrared (IR) and digital
camera (DC) images that can be saved on memory cards:
IR + DC + 30
seconds voice
annotation
IR + DCIR onlyCard size
60085055001 GB
1200170011 0002 GB
Naming
convention
The naming convention for images is IR_xxxx.jpg, where xxxx is a unique counter.
Procedure
To save an image directly, pull and hold down the trigger for more than 1 second.
NOTE
You can change the function of the trigger in the Settings menus. The function can
be set to one of the following:
■
Preview/Save.
■
Save directly.
■
Always preview.
Publ. No. T559597 Rev. a554 – ENGLISH (EN) – September 27, 2011 31
15 – Working with images

FLIR E series Specifications

General

Brand	FLIR
Model	E series
Category	Thermal cameras
Language	English