20.2 Creating a voice annotation
General
A voice annotation is an audio recording that is stored in an infrared image file.
The voice annotation is recorded using a Bluetooth headset. The recording can be
played back in the camera, and in image analysis and reporting software from FLIR
Systems.
Procedure
Follow this procedure to create a voice annotation:
To preview an image, pull the trigger.1
Use the navigation pad to select .
2
Do one or more of the following, and push the joystick to confirm each
choice. Some buttons have more than one function.
■
To start a recording, select .
■
To pause/resume a recording, select .
■
To stop a recording, select .
■
To listen to a recording, select .
■
To pause a voice annotation that you are listening to, select .
■
To go to the beginning of a recording, select .
■
To delete a recording, move the joystick left/right or up/down and select
.
■
To save a recording, select Save.
3
56 Publ. No. T559597 Rev. a554 – ENGLISH (EN) – September 27, 2011
20 – Annotating images
To Next Page
Loading...
