FLIR E series

17.3 Moving or resizing a measurement tool
General
You can move and resize a measurement tool.
NOTE
This procedure assumes that you have previously laid out a measurement tool
on the screen.
■
■
You can also move and resize the measurement tool using your finger.
Procedure
Follow this procedure to move or resize a measurement tool:
Push to display the menu system.
1
Use the navigation pad to go to (Tools).
2
Push to display a submenu.
3
Use the navigation pad to go to (Adjust tools).
4
Push and select the measurement tool that you want to move or
resize.
5
Use the navigation pad to move or resize the measurement tool.6
46 Publ. No. T559597 Rev. a554 – ENGLISH (EN) – September 27, 2011
17 – Working with measurement tools