Procedure
Follow this procedure to change the object parameters:
Push to display the menu system.
1
Use the navigation pad to go to .
2
Push to display a dialog box.
3
Use the navigation pad to select and change an object parameter.4
Push . This will close the dialog box.
5
NOTE
Of the parameters above, emissivity and reflected apparent temperature are the two
most important to set correctly in the camera.
Related topics
For in-depth information about parameters, and how to correctly set the emissivity
and reflected apparent temperature, see section 31 – Thermographic measurement
techniques on page 160.
Publ. No. T559597 Rev. a554 – ENGLISH (EN) – September 27, 2011 49
17 – Working with measurement tools
To Next Page
Loading...
