4
INTRODUCTION TO THE PATCH SYSTEM
PATCH MANUAL
INTRODUCTION
The Flock Audio PATCH System is a digitally controlled, 100%
analog audio patch bay routing system. A combination of
Software known as the PATCH APP and a 64 Point Connection
PATCH Hardware component, combined allows users to easily
route and control analog audio routings without having to resort
to the use of manual patch cables.
The PATCH APP software application (OSX & Windows
Compatible) is designed with familiarity in mind. PATH’s in the
application represent audio signal flows from top to bottom.
Signal flows are divided up into single vertical columns allowing
users to drag + drop available analog audio equipment connected
to the PATCH’s Hardware component. This analog audio
equipment is cataloged in the Hardware Index located to the left
side of the PATCH APP.
The PATCH Hardware component is a 1U rack mountable unit that
acts as the center piece hub of an audio equipment processing
setup. Utilizing digital control over analog audio signals is what
makes the PATCH System unique and unlike anything else in the
audio industry.
This manual with go more in-depth into the functions, features
and recommended usage of the Flock Audio PATCH System.
INTRODUCTION TO THE PATCH SYSTEM…
To Next Page
Loading...