STRADA PAL – MAINTENANCE MANUAL
132/149
8.8.2 Replacing of the antenna cover
8.8.2.1 Preliminary operations
A. Open the maintenance door
B. Turn off the terminal
8.8.2.2 Replacement
A. Remove the 27 Ah battery
B. Remove the 4 nuts (1).
C. Remove the protective housing (2).
D. Remove the protection of the housing upper part (3).
Replacing the protective housing
8.8.2.3 Installation
A. Repeat the previous steps in reverse.
Reshape the sealing compound cones around the protective housing rods before
reinstallation.
While tightening, ensure that the housing and the protective housing are centered.
8.8.2.4 End of procedure
A. Turn on the terminal
B. Close the maintenance door
To Next Page
Loading...