STRADA PAL – MAINTENANCE MANUAL
137/149
I. Check that the sticker is correctly positioned inside its intended location (no
bubbles, and not extending beyond any side).
A poorly applied sticker (with bubbles or extending beyond its intended location) may
result in malfunction and increases the risk of tearing.
J. If the positioning is not satisfactory, remove the sticker immediately and start again
the procedure with a new sticker.
K. If the positioning is satisfactory, finish the process by rubbing vigorously with a
clean cloth, especially on the sticker sides (that way it will be more difficult to tear off
the sticker).
Do not reuse a sticker that was removed. If any problem occurs during the procedure, use
a new sticker.
To Next Page
Loading...