STRADA PAL – MAINTENANCE MANUAL
141/149
8.9.3 Replacing the battery holder
8.9.3.1 Preliminary operations
A. Open the floor fixation trapdoor
B. Turn off the terminal
8.9.3.2 Replacement
A. Remove the battery from the floor fixation compartment
B. Loosen the 2 flange nuts to free the rear part of the support.
C. Lift the support and remove it.
Replacing the battery holder
8.9.3.3 Installation
A. Repeat the previous steps in reverse.
8.9.3.4 End of procedure
A. Turn on the terminal
B. Close the maintenance door
To Next Page
Loading...