FLOWBIRD STRADA PAL - Page 60

STRADA PAL – MAINTENANCE MANUAL
60/149
8.2.8 Replacing the coin inlet
8.2.8.1 Preliminary operations
A. Open the maintenance door
B. Turn off the terminal
8.2.8.2 Replacement
A. Remove the lower front panel (1)
B. Remove the 2 Torx 8 screws (2).
C. Remove the coin inlet (3).
Replacing the coin inlet
8.2.8.3 Installation
Warning: Check during the reassembly that the seal (1) is here and well positioned.
A. Repeat the previous steps in reverse.
Installing the coin inlet
8.2.8.4 End of procedure
A. Turn on the terminal
B. Run a coin payment test, then cancel it.
C. Close the maintenance door