Fluke 190 Series II - HF Voltage Probe Connection Using Ground Spring; HF Voltage Probe Connection Using Probe Tip to BNC Adapter (190-5 xx)

Fluke 190 series II
Users Manual
74
All memories in use
If no free memory locations are available a message pops
up that proposes to you to overwrite the oldest data set.
Do one of the following:
If you don’t want to overwrite the oldest data set,
- press
F3
, then delete one or more memory
locations, and save again.
If you want to overwrite the oldest data set,
- press
F4
.
Editing names
To name the screen+setup according to your own
preferences, continue from step 4 as follows:
5
F1
Open the EDIT NAME menu
6
F2
F3
Skip to a new character position.
7
ENTER
Select another character and press
ENTER to accept your choice.
Repeat 6 and 7 until done.
8
F1
Accept the name and return to the
SAVE AS menu.
9
ENTER
Highlight OK SAVE to save the
actual screen using the edited
name.
To modify the default name generated by the test tool,
continue from step 8 as follows:
9
ENTER
Highlight SET DEFAULT to save
the new default name