Fluke 2638A - Thermocouple Channels

Input and Channel Configuration
Channel Configuration 3
3-19
Thermocouple Channels
Refer to Table 3-6 to configure a thermocouple channel.
Table 3-6. Thermocouple Channel Configuration
1
2
3
4
5
hce021.eps
Item Function
 Thermocouple function selection.
 Select the thermocouple type.
 Input a custom alpha-numeric label to help identify the channel (optional).
 Set an alarm for this channel (optional). See “HI and LO Channel Alarms” on page 3-30.
 Apply Mx+B scaling to the measurement (optional). See “Mx+B Scaling” on page 3-29.
1.888.475.5235info@Fluke-Direct.com
Fluke-Direct.com