Fluke 6200 - General Specifications

6200
Users Manual
30
Specifications
General Specifications
Size..................... 200 mm (L) x 275 mm (W) x 100 mm (H)
Weight....................................................................... 3.0 kg
Power Supply................ 240 V + 10 % - 15 %, 50 Hz ± 2 %
Power consumption (Tester).................. 13 W typical (idle)
60 W max. during 25 A Bond Test
Operating temperature...................................... 0 to +40 °C
Storage Temperature..................................... -10 to +60 °C
Relative Humidity
.............................................non condensing < +10 °C
...............................................95% from +10 to +30 °C
...............................................75% from +30 to +40 °C
Operating Altitude ....................................... 0 up to 2000 m
Sealing..................... IP-40 (enclosure), IP-20 (connectors)
EMC............................complies with EN61326-1, criteria B
EMI Immunity.............................................................3 V/m
Safety.................Complies with IEC/EN61010-1 2
nd
edition
DIN VDE0404-1 and DIN VDE0404-2
IEC/EN 61557 part 1, 2, 4
CAT II, 300 V, pol 2
Printer – PC RS232 Interface
Baud rate .....................................factory default 9600
Data bits .................................................................... 8
Stop bits..................................................................... 1
Parity ....................................................................... no