1
6200 Appliance Tester
Users Manual
Introduction
The Fluke model 6200 Appliance Tester (hereafter
referred to as ‘the tester’) is designed to carry out the
following tests to ensure the integrity of electrical
equipment / portable appliances:
• L N Mains Volts and Mains Wiring test.
• Insulation test (500 V dc).
• Earth Bond test 200 mA and 25 A with test lead zero
facility.
• Substitute Leakage Current test.
• Touch Current test.
• IEC Lead test.
• Leakage test.
• Appliance Power and Load Current test.
• PELV test
Contacting Fluke
To contact Fluke for product information, operating
assistance, service, or to get the location of the nearest
Fluke distributor or Service Centre, call:
• for UK & Ireland:
+44 (0)1603 256 600
• for other European countries:
+31-402-678-200 in Europe
Visit Fluke’s web site at:
www.fluke.co.uk
or
www.fluke.com
Register your Tester at: register.fluke.com
To Next Page
Loading...
